Acer Aspire 3 (A324-45) Laptop RAM & SSD Upgrade Guide | Verif...
Check verified slot configurations, hardware limits, and live product matches.
System Compatibility Verified
Active Device Hardware Analysis
ACER Acer Aspire 3 (A324-45) Laptop
Model: A324-45 | Launch Year: 2024
The Acer Aspire 3 (A324-45) is a highly efficient device featuring 12 GB of integrated DDR4 memory and an M.2 NVMe PCIe Gen4 slot designed for fast, reliable storage expansion. While the system memory is fixed at its factory-configured capacity, you can significantly enhance your device's responsiveness by upgrading to a higher-capacity NVMe SSD. Accessing the internal hardware is a straightforward process when using a precision screwdriver and a non-marring plastic pry tool, provided you follow careful chassis-opening safety protocols. By performing this storage upgrade, you will enjoy faster boot times, improved application loading, and a more streamlined computing experience.
Stock RAM
12 GB
RAM Tech / Speed
LPDDR4X @ 2933 MHz
RAM DDR Standard
DDR4
Max RAM Limit
12 GB GB
Installed Storage
256 GB
Storage Interface
SSD
SSD Slot Config
M.2 NVMe PCIe Gen4 (Slots: 1)
Max Storage Limit
512 GB GB
RAM Upgradeability Analysis
Soldered / Non-Upgradeable
The memory chips on this specific motherboard are soldered directly. RAM expansion is physically not possible.
Storage Upgradeability Analysis
Expandable (Slots: 1)
Max Storage: 512 GB GB
Slot Form Factor: M.2
✨ Headroom: Add up to 256 GB more!
Quick Guide Outline
Upgrade Summary Overview
RAM Config Overview
Motherboard supports DDR4 architecture. Live slot configuration is rated as No.
Storage Overview
Primary SSD standard uses M.2 size with NVMe compatibility.
Disclaimer Notice
Power off, unplug, and discharge your body's static electricity prior to opening the internal layout.
RAM Installation Instructions
1. Completely power down the laptop and disconnect the power adapter and all external accessories.
2. Place the device on a clean, anti-static work surface to prevent damage from electrostatic discharge.
3. Remove all screws from the bottom chassis cover using a precision PH0 screwdriver.
4. Utilize a plastic pry tool to gently release the perimeter clips and lift the bottom cover away from the base assembly.
5. Locate the battery connector and carefully unplug the harness from the motherboard to ensure the system is completely de-energized.
6. Identify the memory configuration on the motherboard; note that the 12 GB DDR4 memory is integrated into the system and does not feature SO-DIMM slots for user-installed modules.
7. Confirm that the system is already operating at its maximum factory-configured dual-channel bandwidth supported by the mainboard architecture.
8. Reconnect the battery harness securely to the motherboard connector.
9. Realign the bottom chassis cover and apply gentle, even pressure around the edges until all clips snap back into place.
10. Reinstall the bottom panel screws and reconnect the power adapter to resume normal operation.
2. Place the device on a clean, anti-static work surface to prevent damage from electrostatic discharge.
3. Remove all screws from the bottom chassis cover using a precision PH0 screwdriver.
4. Utilize a plastic pry tool to gently release the perimeter clips and lift the bottom cover away from the base assembly.
5. Locate the battery connector and carefully unplug the harness from the motherboard to ensure the system is completely de-energized.
6. Identify the memory configuration on the motherboard; note that the 12 GB DDR4 memory is integrated into the system and does not feature SO-DIMM slots for user-installed modules.
7. Confirm that the system is already operating at its maximum factory-configured dual-channel bandwidth supported by the mainboard architecture.
8. Reconnect the battery harness securely to the motherboard connector.
9. Realign the bottom chassis cover and apply gentle, even pressure around the edges until all clips snap back into place.
10. Reinstall the bottom panel screws and reconnect the power adapter to resume normal operation.
SSD Installation Instructions
1. Shut down the laptop entirely and remove the AC power adapter.
2. Remove the screws from the bottom base cover and use a plastic pry tool to safely unclip the panel from the laptop frame.
3. Locate the battery connector on the motherboard and disconnect it to ensure safe handling of internal components.
4. Locate the M.2 NVMe PCIe Gen4 SSD slot on the motherboard.
5. Remove the single Phillips-head screw securing the existing 256 GB SSD.
6. Gently slide the old SSD out of the M.2 slot and set it aside.
7. Align the notch on your new NVMe PCIe Gen4 SSD (up to 512 GB) with the key in the M.2 connector.
8. Insert the new drive into the slot at a 30-degree angle until it is fully seated.
9. Press the drive down gently until it rests on the standoff and secure it using the original Phillips-head screw.
10. Reconnect the battery harness, snap the bottom panel back into place, and secure the chassis screws.
11. Power on the device and enter the BIOS setup to verify the new storage capacity is correctly recognized.
2. Remove the screws from the bottom base cover and use a plastic pry tool to safely unclip the panel from the laptop frame.
3. Locate the battery connector on the motherboard and disconnect it to ensure safe handling of internal components.
4. Locate the M.2 NVMe PCIe Gen4 SSD slot on the motherboard.
5. Remove the single Phillips-head screw securing the existing 256 GB SSD.
6. Gently slide the old SSD out of the M.2 slot and set it aside.
7. Align the notch on your new NVMe PCIe Gen4 SSD (up to 512 GB) with the key in the M.2 connector.
8. Insert the new drive into the slot at a 30-degree angle until it is fully seated.
9. Press the drive down gently until it rests on the standoff and secure it using the original Phillips-head screw.
10. Reconnect the battery harness, snap the bottom panel back into place, and secure the chassis screws.
11. Power on the device and enter the BIOS setup to verify the new storage capacity is correctly recognized.
Matched System Memory Modules (DDR4)
Upgrade recommendations are locked for on-board RAM.
Compatible Solid State Drives
EVM 256 GB Laptop, Desktop Internal Solid State Drive (SSD)
256 GB | Internal | M.2 (2280) | PCIe Gen 3.0 x4
₹0
View Product
EVM 128 GB Laptop, Desktop Internal Solid State Drive (SSD)
128 GB | Internal | M.2 (2280) | PCIe Gen 3.0 x4
₹3,199
View Product
Hatronyx HX-3500 Alpha NVMe SSD
256 GB | Internal | M.2 (2280) | PCIe Gen 3.0 x4
₹4,476
View Product
Ant Esports Pro NVMe SSD
256 GB | Internal | M.2 (2280) | PCIe Gen 3.0 x4
₹4,892
View Product
Hikvision E3000 NVMe SSD
256 GB | Internal | M.2 (2280) | PCIe Gen 3.0 x4
₹4,999
View Product
Crucial P3 500 GB Desktop, Laptop Black PCIe NVMe Internal Solid State Drive (SSD)
500 GB | Internal | M.2 (2280) | PCIe Gen 3.0 x4
₹5,275
View Product